Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY LH
Attach the wire harness clamp and connect the 3 connectors.
|
Connect the Seat of the Screw. |
|
Install in this Direction |
Push the headlight assembly LH backward and connect the bracket to the seat of the screw.
Be careful not to break the bracket.
Install the 3 screws and bolt.
2.INSTALL FRONT BUMPER COVER
3.ADJUST HEADLIGHT AIMING
4.ADJUST FOG LIGHT AIMING