Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81110B
1.REMOVE NO. 1 HEADLIGHT BULB
Disconnect the connector.
|
Counterclockwise |
Turn the No. 1 headlight bulb counterclockwise until the bulb stops.
Remove the No. 1 headlight bulb.
Do not touch the glass part of the No. 1 headlight bulb.
81110B
2.INSTALL NO. 1 HEADLIGHT BULB
Insert the No. 1 headlight bulb into the headlight unit assembly LH.
Do not touch the glass part of the No. 1 headlight bulb.
|
Clockwise |
Turn the No. 1 headlight bulb clockwise until the bulb stops to install it.