Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM3270E _59 Vehicle Exterior _041720 LIGHTING (EXT) _0199672 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81550L 1.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E319875C01
0.573,1.031 1.146,1.51 true 1.375,4.323 1.885,4.5 true 0.396,0.917 0.708,1.073 0.313,0.156 10 false *a 1.927,4.417 2.146,4.594 0.219,0.177 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


b.
E319879

Remove the rear turn signal light bulb from the bulb socket.


Hide 81550N 2.REMOVE BACK UP LIGHT BULB

a.
E319873C01
0.583,0.719 1.135,1.146 true 0.646,3.802 1.198,4.229 true 0.417,0.604 0.729,0.76 0.313,0.156 10 false *a 0.469,3.698 0.781,3.854 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


b.
E319880

Remove the rear turn signal light bulb from the bulb socket.


Hide 81565 3.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.
E319877C01
1.677,0.656 2.229,0.406 true 0.615,3.229 1.229,2.969 true 2.271,0.292 2.51,0.51 0.24,0.219 10 true *a 0.438,3.156 0.75,3.313 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


Turn the connector cap counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the connector cap.


b.
E322671

Disconnect the connector.


c.
E319881

Detach the wire harness clamp and remove the rear combination light socket and wire sub-assembly LH.