Home › Vehicle Exterior › LIGHTING (EXT) › REAR TURN SIGNAL LIGHT BULB
RM3270E _59 Vehicle Exterior _041720 LIGHTING (EXT) _0199674 REAR TURN SIGNAL LIGHT BULB A

LIGHTING (EXT)  REAR TURN SIGNAL LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81560 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH

a.
E319813C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the rear combination light assembly LH.


b.

Remove the 2 screws.


c.
E319871C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Pull in this Direction
V100155

Protective Tape


Place your hand at the location shown in the illustration and pull the rear combination light assembly LH toward the rear of the vehicle to detach the pin and guide to disconnect it.

NOTICE:

Pull the rear combination light assembly LH straight towards the rear of the vehicle to prevent the guide from becoming damaged.



Hide 81550L 2.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E319875C01
0.573,1.031 1.146,1.51 true 1.375,4.323 1.885,4.5 true 0.396,0.917 0.708,1.073 0.313,0.156 10 false *a 1.927,4.417 2.146,4.594 0.219,0.177 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


b.
E319879

Remove the rear turn signal light bulb from the bulb socket.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the bulb socket.


b.
E319876C01
1.365,1.906 1.865,2.01 true 0.646,1.021 1.427,1.729 true 0.5,3.75 0.99,4 true 1.917,1.927 2.135,2.135 0.219,0.208 10 true *b 0.448,0.906 0.76,1.063 0.313,0.156 10 false *a 0.333,3.646 0.646,3.802 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.


Hide 81560 4.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH

a.
E319872C01
0,0 0,0 false
V113147

Slide in this Direction
V100155

Protective Tape


Slide the rear combination light assembly LH towards the vehicle front to attach the pin and guide.


b.

Install the 2 screws.