Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041713 HEATING / AIR CONDITIONING _0199984 REAR AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT  REASSEMBLY  


PROCEDURE

Hide 88515B 1.INSTALL REAR COOLING UNIT EXPANSION VALVE

E317576

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the air conditioning tube and accessory assembly.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the air conditioning tube and accessory assembly.

NOTICE:

Keep the O-ring and O-ring fitting surfaces free of foreign matter.



c.

Install the rear cooling unit expansion valve to the air conditioning tube and accessory assembly.


Hide 88710H 2.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.
E317575

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the rear evaporator sub-assembly.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the rear evaporator sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surfaces free of foreign matter.



c.

Using a 4 mm socket hexagon wrench, install the air conditioning tube and accessory assembly to the rear evaporator sub-assembly with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


d.
E317574

Install the rear evaporator sub-assembly to the cooler unit case (sink side).


e.
E317572

Install the No. 2 cooler unit drain hose.

NOTICE:

Make sure that the No. 2 cooler drain hose is not deformed during installation.



f.
E317571

Attach the claw to install the cooling unit case (motor side).


g.

Install the 5 screws.


Hide 88600 3.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

a.
E317569

Install the air conditioning control assembly with the 2 screws.


Hide 87138D 4.INSTALL REAR BLOWER RESISTOR (for Manual Air Conditioning System)

a.
E317570

Install the rear blower resistor with the 2 screws.


Hide 87103D 5.INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E317568

Install the rear blower motor with fan sub-assembly with the 3 screws.


Hide 87218C 6.INSTALL REAR NO. 6 AIR DUCT

a.
E317567

Attach the claw to install the rear No. 6 air duct.


Hide 88630Y 7.INSTALL REAR COOLER RELAY (for Manual Air Conditioning System)

a.
E318766

Install the rear cooling relay with the screw.