87138D
1.INSPECT REAR BLOWER RESISTOR
| *a | Component without harness connected
(Rear Blower Resistor) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 4(HI) - 2(M2) | Always | 0.52 to 0.60 Ω |
| 4(HI) - 3(M1) | Always | 1.49 to 1.67 Ω |
| 4(HI) - 1(LO) | Always | 3.12 to 3.60 Ω |
If the result is not as specified, replace the rear blower resistor.