Home › Vehicle Interior › HEATING / AIR CONDITIONING › COOLER EXPANSION VALVE › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041713 HEATING / AIR CONDITIONING _0199993 COOLER EXPANSION VALVE A

HEATING / AIR CONDITIONING  COOLER EXPANSION VALVE  INSTALLATION  


PROCEDURE

Hide 88515 1.INSTALL COOLER EXPANSION VALVE

a.

Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

Compressor Oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.

Temporarily install the cooler expansion valve.


d.

Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 88710E 2.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

a.
E319139

Remove the vinyl tape from the air conditioner tube and accessory assembly.


b.

Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the 2 O-rings.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



d.

Connect the air conditioner tube and accessory assembly.


e.

Rotate the hook connector in the direction indicated by the arrow in the illustration and install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 3. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT