Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041713 HEATING / AIR CONDITIONING _0199994 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

Hide 27415 3.REMOVE GENERATOR WITH CLUTCH PULLEY

Hide 4.REMOVE FRONT WHEEL LH

Hide 53737B 5.REMOVE FRONT FENDER APRON SEAL LH

a.

Remove the 6 clips and front fender apron seal LH.


Hide 88711 6.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E321405

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88704 7.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E321406

Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 8.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH

a.
E321407

Disconnect the connector.


b.

Detach the clamp.


c.
E321408C01
0,0 0,0 false
V100135

Bolt
V100136

Nut


Remove the 2 bolts and 2 nuts.


d.
E321409

Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with magnet clutch.

HINT:

Remove the compressor assembly with magnet clutch from the vehicle with the stud bolt remaining in the compressor assembly with magnet clutch.