84970
1.INSPECT COMBINATION SWITCH ASSEMBLY (ECO MODE SWITCH)
| *a | Component without harness connected
(Combination Switch Assembly (Eco Mode Switch)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4(ECU) - 2(E) | ECO mode switch ON position | Below 10 Ω |
| ECO mode switch OFF position | 10 kΩ or higher |
If the result is not as specified, replace the combination switch assembly (eco mode switch).