Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM › 2015.08–2016.01
RM3270E _52 Drivetrain _041686 AXLE AND DIFFERENTIAL _0201041 DIFFERENTIAL SYSTEM D

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


The 4 wheel drive control ECU records DTCs when the ECU detects a malfunction in the ECU itself or in system circuits.

The DTCs can be read through the DLC3 of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform troubleshooting.


CHECK DLC3


a.

Inspect the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge the battery before proceeding.




FUNCTION OF INDICATOR LIGHT


a.

When a problem occurs in the differential system, the rear differential lock indicator light on the combination meter assembly rapidly blinks* to inform the driver of the problem.

*: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)


b.

Indicator light (illuminated or blinking) or multi-information display status when DTC is output

DIFFERENTIAL SYSTEM
DTC No. Rear Differential Lock Indicator Light 4WD Indicator Light (Green) 4LO Indicator Light Multi-information Display Message
U0122 Rear differential locked: Illuminated
Rear differential free: Not illuminated
Not illuminated Rapidly blinking 2WD-4WD mode change malfunction visit your dealer
U0416
P163B
P17BB Rapidly blinking Status displayed* Status displayed* -
P17BC
P17C0 Rapidly blinking Status displayed* Status displayed* -
P17C1
P17CC Rapidly blinking Status displayed* Status displayed* -

*: Displays the 2WD/4WD mode status during a malfunction


Rapidly blinking: Blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)




CHECK INDICATOR LIGHT


a.

With the ignition switch turned to ON and the transfer in H2, press the differential lock switch and check that the rear differential lock indicator light blinks* 3 times.

*: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)