Home › Drivetrain › AC60F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM3270E _52 Drivetrain _041680 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0201466 TRANSMISSION CONTROL CABLE N

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
C327945

·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 33820B 3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C326303C01
0,0 0,0 false
V113147

Disconnect in this Direction


Disconnect the end of the transmission control cable assembly from the transmission floor shift assembly.


c.
C326297C01
1.823,2.583 2.052,2.313 2.052,2.313 2.208,2.313 true 2.271,2.219 2.583,2.375 0.313,0.156 10 false *1 0.313,0.063 0.625,0.219 0.313,0.156 10 false *a 0.323,1 0.635,1.156 0.313,0.156 10 false *b 2.177,0 2.49,0.156 0.313,0.156 10 false *c 0.323,2.396 0.635,2.552 0.313,0.156 10 false *a 1.135,0 1.448,0.156 0.313,0.156 10 false *c 1.635,0.885 1.948,1.042 0.313,0.156 10 false *c 1.5,1.833 1.813,1.99 0.313,0.156 10 false *c
*1 Lock Piece
*a Side View
*b Bottom View
*c Push


Push the 2 claws together at the top of the transmission control cable lock piece. While holding the 2 claws together, push the 2 lugs on the bottom of the lock piece toward each other and upward to pull out the lock piece.


d.
C326304C01
0.344,0.667 0.438,0.667 0.438,0.667 0.521,0.969 true 0.167,0.583 0.479,0.74 0.313,0.156 10 false *1
*1 Lock Piece
V113147

Connect in this Direction


Connect the end of the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:
·

The shift lever should be in N.

·

Make sure that the lock piece is pulled up.

·

Push on the end of the cable all the way to the base of the transmission floor shift assembly pin.




e.
C326299C01
1.74,0.469 1.896,0.167 1.896,0.167 2.042,0.167 true 2.167,0.688 2.323,0.385 2.323,0.385 2.469,0.385 true 2.083,0.083 2.396,0.24 0.313,0.156 10 false *1 2.521,0.302 2.833,0.458 0.313,0.156 10 false *2 1.594,1.896 1.906,2.052 0.313,0.156 10 false *a
*1 Lock Piece
*2 Adjuster Case
*a Push


Push the lock piece into the adjuster case.

NOTICE:
·

Check that the park/neutral position switch assembly and shift lever are in neutral.

·

Securely push in the lock piece until it locks.




f.

After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.