44320
1.INSTALL VANE PUMP ASSEMBLY
Install the vane pump with the 2 bolts.
44411
2.CONNECT PRESSURE FEED HOSE
Install a new gasket to the pressure feed tube assembly.
| *a | Stopper |
Install the union bolt and connect the pressure feed tube to the vane pump assembly.
Make sure that the stopper of the pressure feed tube touches the front housing.
44348A
3.CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE
Connect the oil reservoir to pump hose to the vane pump assembly and slide the hose clip.
Connect the connector to the power steering oil pressure switch.
17344E
4.INSTALL NO. 4 AIR HOSE
16361A
5.INSTALL FAN AND GENERATOR V BELT
6.ADD POWER STEERING FLUID
7.ADJUST POWER STEERING FLUID
8.CHECK FOR POWER STEERING FLUID LEAK