Home › Steering › STEERING COLUMN › STEERING PAD SWITCH
RM3270E _55 Steering _041697 STEERING COLUMN _0201968 STEERING PAD SWITCH G

STEERING COLUMN  STEERING PAD SWITCH  INSPECTION  


PROCEDURE

Hide 84250A 1.INSPECT STEERING PAD SWITCH ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

C330519C01
2.552,0.688 2.865,0.854 0.313,0.167 5.771,0.583 6.115,0.75 0.344,0.167 3.406,0.677 3.146,0.344 true 1.76,1.823 1.417,1.24 true 1.448,1.844 1.083,1.521 true 1.438,2.167 0.969,2.385 true 1.74,2.219 1.031,2.656 true 1.594,2.49 1.219,2.854 true 1.948,2.521 1.667,3.135 true 1.969,2.229 1.385,3.063 true 3.271,0.688 3.031,0.552 true 3.51,0.667 3.333,0.167 true 3.99,1.281 3.76,0.885 true 3.771,1.365 3.646,0.885 true 4,0.167 3.771,0.667 true 3.208,1.271 3.406,0.885 true 5.333,0.604 5.167,0.167 5.167,0.167 5.083,0.167 true 5.667,0.167 5.583,0.167 5.583,0.167 5.438,0.594 true 5.167,1.083 5.25,1.083 5.25,1.083 5.313,0.792 true 2.021,1.802 1.76,1.073 true 5.333,2.865 5.052,2.073 true 5.688,2.729 5.25,2.229 true 6.156,2.323 5.719,2.167 true 6.135,1.771 5.74,1.885 true 5.469,1.302 5.229,1.771 true 5.74,1.354 5.271,1.958 true 5.927,1.51 5.458,1.99 true 4.094,0.365 3.875,0.677 true 4.125,1.104 3.896,0.885 true 3.073,1.01 3.281,0.875 true 2.948,0.042 3.563,0.24 0.615,0.198 10 false +DP2 2.823,0.24 3.438,0.438 0.615,0.198 10 false +DP 2.802,0.458 3.417,0.656 0.615,0.198 10 false HO 4.063,0.052 4.677,0.25 0.615,0.198 10 false IL+2 2.958,1.302 3.573,1.5 0.615,0.198 10 false EAU 3.688,1.385 4.302,1.583 0.615,0.198 10 false AU2 4.021,1.24 4.635,1.438 0.615,0.198 10 false AU1 0.906,1.427 1.219,1.583 0.313,0.156 10 false *1 0.75,2.302 1.063,2.458 0.313,0.156 10 false *2 1.25,1.094 1.563,1.25 0.313,0.156 10 false *3 0.854,2.625 1.167,2.781 0.313,0.156 10 false *4 1.615,0.906 1.927,1.063 0.313,0.156 10 false *5 1.583,3.177 1.896,3.333 0.313,0.156 10 false *6 1.042,2.854 1.354,3.01 0.313,0.156 10 false *7 1.24,3.073 1.552,3.229 0.313,0.156 10 false *8 5.458,1.125 5.771,1.281 0.313,0.156 10 false *9 5.729,2.698 6.198,2.854 0.469,0.156 10 false *10 5.313,2.906 5.781,3.063 0.469,0.156 10 false *11 5.958,1.417 6.427,1.573 0.469,0.156 10 false *12 5.729,1.188 6.198,1.344 0.469,0.156 10 false *13 6.177,1.677 6.646,1.833 0.469,0.156 10 false *14 6.188,2.26 6.656,2.417 0.469,0.156 10 false *15 2.594,1.594 3.063,1.75 0.469,0.156 10 false *16 4.156,0.271 4.771,0.469 0.615,0.198 10 false SUP 4.156,1.042 4.771,1.24 0.615,0.198 10 false SDN 4.854,1.01 5.469,1.208 0.615,0.198 10 false ECC 4.781,0.083 5.396,0.281 0.615,0.198 10 false SDN 5.708,0.094 6.323,0.292 0.615,0.198 10 false SUP 2.771,0.948 3.385,1.146 0.615,0.198 10 false ECC 2.667,0.698 2.823,0.896 0.156,0.198 10 false A 5.885,0.594 6.042,0.792 0.156,0.198 10 false B
*1 Volume+ Switch *2 Volume- Switch
*3 Seek+ Switch *4 Seek- Switch
*5 MODE Switch *6 On Hook Switch
*7 Off Hook Switch *8 Voice Switch
*9 UP *10 DOWN
*11 LEFT *12 RIGHT
*13 ENTER Switch *14 BACK Switch
*15 TOP Switch *16 Horn Wire


Standard Resistance:
Tester Connection Switch Condition Specified Condition
A10 (AU2) - A8 (EAU) No switch pushed 95 to 105 kΩ
MODE switch pushed Below 2.5 Ω
Voice switch pushed 2954.5 to 3265.5 Ω
Off hook switch pushed 950 to 1050 Ω
On hook switch pushed 312.6 to 345.5 Ω
A11 (AU1) - A8 (EAU) No switch pushed 95 to 105 kΩ
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2954.5 to 3265.5 Ω
Seek+ switch pushed Below 2.5 Ω
Seek- switch pushed 312.6 to 345.5 Ω
A3 (+DP2) - A8 (EAU) No switch pushed 95 to 105 kΩ
UP 312.6 to 345.5 Ω
DOWN 950 to 1050 Ω
LEFT Below 2.5 Ω
RIGHT 2954.5 to 3265.5 Ω
A2 (+DP) - A8 (EAU) No switch pushed 95 to 105 kΩ
ENTER switch pushed Below 2.5 Ω
BACK switch pushed 950 to 1050 Ω
TOP switch pushed 312.6 to 345.5 Ω
A1 (HO) - Horn Wire Always Below 2.5 Ω
A6 (SUP) - B2 (SUP) Always Below 2.5 Ω
A7 (ECC) - B7 (ECC) Always Below 2.5 Ω
A12 (SDN) - B3 (SDN) Always Below 2.5 Ω


If the result is not as specified, replace the steering pad switch assembly.


b.

Check the switch illumination.

i.

Connect the battery positive (+) lead to terminal IL+2 and the negative (-) lead to terminal EAU of the steering pad switch assembly connector.


ii.

Check that the switch illumination comes on.

OK:

Steering pad switch illumination comes on.


If the result is not as specified, replace the steering pad switch assembly.