31490
1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY
Install the clutch accumulator assembly with the 2 nuts.
| *a | Torque Wrench Fulcrum Length |
Using a union nut wrench, connect the master cylinder to flexible hose tube and accumulator to flexible hose tube.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)
2.BLEED AIR FROM CLUTCH PIPE LINE
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
3.CHECK FOR CLUTCH FLUID LEAKAGE
Check for leaks in the clutch system.
4.CHECK FLUID LEVEL IN RESERVOIR
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING