Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203008 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 71910A 1.REMOVE FRONT SEAT HEADREST ASSEMBLY

a.

Remove the front seat headrest assembly.


Hide 71848A 2.REMOVE SEAT ADJUSTER COVER CAP RH

a.
B403800C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 seat adjuster cover caps RH in the removal direction shown in the illustration.


Hide 84921C 3.REMOVE POWER SEAT SWITCH KNOB RH (for Slide and Vertical, Lifter)

a.
B403818C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover A, push in the direction indicated by the arrow shown in the illustration to detach the claw.


b.

Pull out removal direction shown in the illustration to remove the power seat switch knob RH.


Hide 84921J 4.REMOVE POWER SEAT SWITCH KNOB RH (for Reclining)

a.
B403820C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover A, push in the direction indicated by the arrow shown in the illustration to detach the claw.


b.

Pull out removal direction shown in the illustration to remove the power seat switch knob RH.


Hide 71867A 5.REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH

a.
B403822C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screw.


b.

Pull down removal direction to detach the guide and remove the front seat inner No. 1 cushion shield RH.


Hide 71811D 6.REMOVE FRONT SEAT CUSHION SHIELD RH

a.
B403827C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover A, lift in the direction indicated by the arrow shown in the illustration and push down in removal direction to detach the claw.


b.
B403831C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull out removal direction to detach the clip and guide.


c.
B403837C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull out removal direction to detach the guide, claw and clip.


d.
B403891C01
1.25,2.813 1.344,3.052 false 0.833,2.99 0.979,3.135 false 1.01,2.333 1.281,2.427 true 0.406,2.427 0.344,2.802 true 1.323,3.083 1.635,3.281 0.313,0.198 10 false *1 1.031,3.083 1.344,3.281 0.313,0.198 10 false *2 0.781,2.24 0.979,2.438 0.198,0.198 10 true *3 0.313,2.24 0.51,2.438 0.198,0.198 10 true *4
*1 Wire Harness Clamp
*2 Connector Clamp
*3 Hook A
*4 Hook B


Detach the hook A.


e.

Disconnect the 2 connectors.


f.

Detach the wire harness clamp and connector clamp.


g.

Detach the hook B.


h.

Detach the claw and remove the front seat cushion shield RH.


Hide 84922B 7.REMOVE FRONT POWER SEAT SWITCH RH

Hide 71861 8.REMOVE FRONT SEAT INNER CUSHION SHIELD RH

a.
B403847C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover A, lift up direction indicated by the arrow shown in the illustration and push down removal direction to detach the claw.


b.
B403848C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull out removal direction to detach the claw and guide to remove the front seat inner cushion shield RH.


Hide 73230 9.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

Hide 71013S 10.REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY RH

a.
B403856

Remove the band in the position shown in the illustration.


b.
B403868C01
0.958,3.052 0.729,2.26 true 2.188,2.917 1.063,1.979 true 1.917,1.385 1.448,0.479 true 2.74,0.917 2.625,0.542 true 1.25,0.302 1.448,0.5 0.198,0.198 10 true *1 2.479,0.323 2.677,0.521 0.198,0.198 10 true *1 2.229,2.938 2.427,3.135 0.198,0.198 10 true *1 0.927,3.104 1.125,3.302 0.198,0.198 10 true *2
*1 Wire Harness Clamp
*2 Connector Clamp


w/ Front Seat Side Airbag:

i.

Detach the wire harness clamp and connector clamp.


ii.
B403877

Detach the wire harness clamp.



c.
B417812

Disconnect the connector and detach the guide.


d.
B403853C01
1.844,4.344 2.542,3.708 true 1.531,1.521 2.51,1.927 true 0.063,0.063 0.302,0.26 0.24,0.198 10 true *A 0.104,2.49 0.344,2.688 0.24,0.198 10 true *B 1.635,4.313 1.854,4.5 0.219,0.188 10 true *1 2.625,1.875 2.844,2.063 0.219,0.188 10 true *1
*A LH Side
*B RH Side
*1 Separate Type Front Seat Cushion Cover


Detach the hook.


e.
B403855C01
0.083,0.094 0.302,0.292 0.219,0.198 10 true *A 0.146,2.563 0.365,2.76 0.219,0.198 10 true *B
*A LH Side
*B RH Side


Remove the 4 bolts and front seatback frame sub-assembly RH.


Hide 71875E 11.REMOVE RECLINING ADJUSTER INSIDE COVER RH

a.
B403878C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Rotate the part in removal direction (1) shown in the illustration.


b.

Pull up in removal direction (2) shown in the illustration to detach the guide and remove the reclining adjuster inside cover RH.


Hide 71875G 12.REMOVE RECLINING ADJUSTER INSIDE COVER LH

HINT:

Use the same procedure as for the RH side.


Hide 71759C 13.REMOVE FRONT NO. 1 SEATBACK HOOK

a.
B403850

Using moulding remover A, lift up direction indicated by the arrow shown in the illustration remove the front No. 1 seatback hook.


Hide 71931 14.REMOVE FRONT SEAT HEADREST SUPPORT

a.
B403857

Remove the 5 hog rings.


b.
B413211C01
0,0 0,0 false
V113147

Remove in this Direction


Open the fasteners as show in the illustration.


c.
B403858C01
0,0 0,0 false
V113147

Remove in this Direction


Pull up removal direction shown in the illustration to detach the guide to the 2 straps.


d.
B403860C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and remove the 2 front seat headrest supports.


Hide 15.REMOVE SEATBACK COVER WITH PAD

a.

w/ Front Seat Side Airbag:

i.

Place your hand at the position shown in the illustration and pull out removal direction to detach the J hook B.

B408556C01
5.771,2.26 5.156,1.656 true 5.479,0.906 5.667,0.677 true 4.781,1.417 4.271,1.177 true 5.802,2.281 6.115,2.479 0.313,0.198 10 false *1 4.042,1.052 4.354,1.25 0.313,0.198 10 false *2 5.667,0.49 5.979,0.688 0.313,0.198 10 false *3
*1 J Hook A *2 J Hook B
*3 J Hook C - -
V113146

Place Hand Here
V113147

Remove in this Direction



ii.

Remove the rivet to J hook B.

B413208C01
2.219,1.656 3.104,1.177 true 0.74,1.75 1.854,1.729 true 5.542,1.771 6.625,1.656 true 4.229,1.135 5.208,1.583 true 0.094,0.094 0.406,0.292 0.313,0.198 10 false *A 3.604,0.146 3.917,0.344 0.313,0.198 10 false *B 0.542,1.677 0.854,1.875 0.313,0.198 10 false *1 6.688,1.542 7,1.74 0.313,0.198 10 false *1 3.167,1.063 3.479,1.26 0.313,0.198 10 false *2 4.021,1.063 4.333,1.26 0.313,0.198 10 false *2
*A for LH seat *B for RH seat
*1 J Hook A *2 J Hook B


HINT:
·

Only remove one of the rivets.


·

For LH seats, remove the top rivet.


·

For RH seats, remove the bottom rivet.




iii.
B408558C01
1.26,1.229 0.792,0.604 true 2.583,3.146 2.083,2.927 true 2.656,3.083 2.969,3.281 0.313,0.198 10 false *1 0.604,0.427 0.917,0.625 0.313,0.198 10 false *2
*1 J Hook B (J Hook A and J Hook B)
*2 J Hook C
V113147

Remove in this Direction


Pull out removal direction shown in the illustration to detach the J hook C to J hook B (J hook A and J hook B).


iv.
B408559C01
0.656,2.583 1.417,2.656 true 1.729,1.75 2.51,1.948 true 2.625,1.917 2.938,2.115 0.313,0.198 10 false *1 0.417,2.49 0.729,2.688 0.313,0.198 10 false *2
*1 J Hook A
*2 J Hook B
V113147

Remove in this Direction


Pull out removal direction shown in the illustration to detach the J hook A to J hook B.



b.
B415861C01
0,0 0,0 false
V113147

Remove in this Direction


Pull out removal direction shown in the illustration to remove the seatback cover with pad.


Hide 71073S 16.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B403864

Remove the 6 hog rings.


Hide 17.REMOVE SEAT COVER WIRE

a.
B403865

Remove the seat cover wire.


Hide 8219A 18.REMOVE FRONT SEAT NO. 2 WIRE RH

a.
B403893

Detach the wire harness clamp.


b.

Disconnect the connector and remove the front seat No. 2 wire RH.


Hide 71759D 20.REMOVE FRONT NO. 2 SEATBACK HOOK

a.
B403871C01
0,0 0,0 false
V113147

Remove in this Direction


Pull down removal direction shown in the illustration to detach the claw and remove the front No. 2 seatback hook.


Hide 71053S 21.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY RH

a.
B403873

Detach the claw and remove the 2 front seatback edge protectors.


b.
B403874C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out removal direction (1) shown in the illustration to separate the front seatback spring sub-assembly RH.


c.

Pull out removal direction (2) shown in the illustration to remove the front seatback spring sub-assembly RH.


d.

Remove the 2 front No. 2 seatback hooks.


Hide 71587B 22.REMOVE FRONT SEATBACK EDGE PROTECTOR

a.
B403876C01
0,0 0,0 false
V100155

Protective Tape


Using a thin-bladed screwdriver with its tip wrapped in protective tape, detach the claw and remove the 2 front seatback edge protectors.


Hide 23.REMOVE SEAT CUSHION COVER WITH PAD

a.

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook and remove the seat cushion cover with pad.

B402132


Hide 71071S 24.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B402133

Remove the 2 hog rings and disconnect the 2 straps of the separate type front seat cushion cover from the separate type front seat cushion pad.


b.
B403870

Remove the 18 hog rings and separate type front seat cushion cover.


Hide 25.REMOVE SEAT COVER WIRE

a.
B403869

Remove the seat cover wire.


Hide 71873 26.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

a.
B403880C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screw.


b.

Pull out removal direction shown in the illustration to detach the guide.


c.
B403882C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Lift up removal direction (1) shown in the illustration to detach the clip.


d.

Pull out removal direction (2) shown in the illustration to remove the front seat lower cushion shield RH.


Hide 71874 27.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH

HINT:

Use the same procedure as for the RH side.


Hide 71537G 28.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

a.
B403884C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Remove the screw.


b.

While rotating the part in removal direction (1) shown in the illustration, detach the claw.


c.

Pull out removal direction (2) shown in the illustration to detach the guide and remove the front seat cushion edge protector RH.


Hide 71538B 29.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

HINT:

Use the same procedure as for the RH side.


Hide 82191 30.REMOVE FRONT SEAT WIRE RH

a.
B403888C01
0.698,2.865 0.917,2.458 true 2.229,2.958 1.792,2.573 true 2.615,2.542 2.208,2.198 true 1,1.948 0.479,1.573 true 0.208,1.365 0.406,1.542 0.198,0.177 10 true *2 0.594,2.938 0.792,3.115 0.198,0.177 10 true *1 2.229,3 2.427,3.177 0.198,0.177 10 true *1 2.688,2.552 2.885,2.729 0.198,0.177 10 true *1
*1 Wire Harness Clamp
*2 Connector Clamp


Detach the wire harness clamp and connector clamp.


b.

Disconnect the 3 connectors.


Hide 71051A 31.REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY RH

a.
B403886C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out removal direction (1) shown in the illustration to detach the hook.


b.

While rotating the part in removal direction (2) shown in the illustration, detach the hook and remove the front seat cushion spring sub-assembly RH.