Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203008 FRONT SEAT ASSEMBLY(for Power Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 72010 1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH

a.
B394290C01
0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*a Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Slide Position Motor RH))


Check the operation of the slide motor.

i.

Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Backward


HINT:

If the result is not as specified, replace the front seat adjuster assembly RH.




b.
B394290C01
0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*a Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Tilt Position Motor RH))


Check the operation of the front vertical motor.

i.

Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Downward


HINT:

If the result is not as specified, replace the front seat adjuster assembly RH.




c.
B361691C15
0.083,0.063 0.302,0.24 0.219,0.177 10 false *a
*a Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Lift Position Motor RH))


Check the operation of the rear lifter motor.

i.

Apply battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Downward


HINT:

If the result is not as specified, replace the front seat adjuster assembly RH.




Hide 71013S 2.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH

a.
B394290C01
0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*a Component without wire harness connected
(Front Seatback Frame Sub-assembly RH (Front Power Seat Reclining Position Motor RH))


Check the operation of the reclining motor.

i.

Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly RH operates smoothly as follows.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Backward


HINT:

If the result is not as specified, replace the front seat seatback frame sub-assembly RH.