Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203009 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 71639 1.REMOVE REAR SEAT CUSHION HINGE COVER LH

a.
B402769

Detach the claw and guide and remove the rear seat cushion hinge cover LH.


Hide 71639 2.REMOVE REAR SEAT CUSHION HINGE COVER LH

a.
B402770

Detach the claw and guide and remove the rear seat cushion hinge cover LH.


b.
B402771

Remove the 2 bolts.


Hide 71694E 3.REMOVE REAR SEAT INNER CUSHION HINGE COVER LH

a.

Operate the reclining adjuster release handle LH as shown in the illustration and fold down the seatback of the rear No. 1 seat assembly LH in the removal direction (1).

B402772C01
0,0 0,0 false
V113146

Place Hand Here - -
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)



b.

Place your hands at the position shown in the illustration and lift up the rear end of the seat in the removal direction (2) to set the rear No. 1 seat assembly LH in the tumble condition.


c.
B402773

Detach the claw and remove the rear seat inner cushion hinge cover LH.


Hide 71694D 4.REMOVE REAR SEAT OUTER CUSHION HINGE COVER LH

a.
B402774

Detach the claw and remove the rear seat outer cushion hinge cover LH.


Hide 5.REMOVE REAR NO. 1 SEAT ASSEMBLY LH

a.
B427172

Disconnect the connector.


b.
B402775

Remove the 2 nuts and rear No. 1 seat assembly LH.


c.
B410984

Remove the rear No. 1 seat assembly LH as shown in the illustration.

NOTICE:
·

Protect the front seat legs.


·

Do not damage the rear No. 1 seat assembly LH, body exterior or interior parts.