Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203009 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY LH

a.
B410985

Place the rear No. 1 seat assembly LH in the vehicle, as shown in the illustration.

NOTICE:

Do not damage the rear No. 1 seat assembly LH, body exterior or interior parts.



b.
B402775N01
2.448,1.76 2.667,1.969 0.219,0.208 10 true (1) 2.073,2.5 2.281,2.708 0.208,0.208 10 true (2)

With the rear No. 1 seat assembly LH in the tumble position, temporarily install the 2 hexagon bolts.

HINT:

Temporarily install the hexagon bolts with the part raised.



c.

Tighten the 2 nuts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.
B427172

Connect the connector.


Hide 71694D 2.INSTALL REAR SEAT OUTER CUSHION HINGE COVER LH

a.
B402774

Attach the claw to install the rear seat outer cushion hinge cover LH.


Hide 71694E 3.INSTALL REAR SEAT INNER CUSHION HINGE COVER LH

a.
B402773

Attach the claw to install the rear seat inner cushion hinge cover LH.


Hide 71639 4.INSTALL REAR SEAT CUSHION HINGE COVER LH

a.
B410996

Temporarily install the No. 1 seat leg sub-assembly LH with the bolt until it contacts the body.


b.

Fold the seat in the installation direction (1) and lock the rear seat lock assembly RH.

HINT:

Make sure it is securely locked.


B404906C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)



c.

Move the seatback of the rear No. 1 seat assembly LH in the installation direction (2) and lock it.


d.
B402771N01
0.448,1.417 0.667,1.635 0.219,0.219 10 true (1) 2.26,1.854 2.479,2.073 0.219,0.219 10 true (2)

Tighten the bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


e.
B402770

Attach the claw and guide to install the rear seat cushion hinge cover LH.


Hide 71639 5.INSTALL REAR SEAT CUSHION HINGE COVER LH

a.
B402769

Attach the claw and guide to install the rear seat cushion hinge cover LH.


b.

Move the seatback of the rear No. 1 seat assembly LH and lock it.