Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203010 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 71629A 1.REMOVE REAR SEAT CUSHION HINGE COVER RH

a.
B404923

Detach the claw and guide and remove the rear seat cushion hinge cover RH.


Hide 71629A 2.REMOVE REAR SEAT CUSHION HINGE COVER RH

a.
B404924

Detach the claw and guide and remove the rear seat cushion hinge cover RH.


b.
B404925

Remove the 2 bolts.


Hide 71693D 3.REMOVE REAR SEAT INNER CUSHION HINGE COVER RH

a.

Operate the reclining adjuster release handle RH as shown in the illustration and fold down the seatback of the rear No. 1 seat assembly RH in the removal direction (1).

B404926C01
0,0 0,0 false
V113146

Place Hand Here - -
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)



b.

Place your hands at the position shown in the illustration and lift up the rear end of the seat in the removal direction (2) to set the rear No. 1 seat assembly RH in the tumble condition.


c.
B404927

Detach the claw and remove the rear seat inner cushion hinge cover RH.


Hide 71693C 4.REMOVE REAR SEAT OUTER CUSHION HINGE COVER RH

a.
B404928

Detach the claw and remove the rear seat outer cushion hinge cover RH.


Hide 5.REMOVE REAR NO. 1 SEAT ASSEMBLY RH

a.
B427171

Disconnect the connector.


b.
B404929

Remove the 2 nuts and rear No. 1 seat assembly RH.


c.
B410997

Remove the rear No. 1 seat assembly RH as shown in the illustration.

NOTICE:
·

Protect the front seat legs.


·

Do not damage the rear No. 1 seat assembly RH, body exterior or interior parts.