Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203010 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY RH

a.
B411853

Place the rear No. 1 seat assembly RH in the vehicle, as shown in the illustration.

NOTICE:

Do not damage the rear No. 1 seat assembly RH, body exterior or interior parts.



b.
B404929N01
0.615,1.438 0.813,1.656 0.198,0.219 10 true (1) 1.104,1.885 1.302,2.104 0.198,0.219 10 true (2)

With the rear No. 1 seat assembly RH in the tumble position, temporarily install the 2 hexagon bolts.

HINT:

Temporarily install the hexagon bolts with the part raised.



c.

Tighten the nuts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.
B427171

Connect the connector.


Hide 71693C 2.INSTALL REAR SEAT OUTER CUSHION HINGE COVER RH

a.
B404928

Attach the claw to install the rear seat outer cushion hinge cover RH.


Hide 71693D 3.INSTALL REAR SEAT INNER CUSHION HINGE COVER RH

a.
B404927

Attach the claw to install the rear seat inner cushion hinge cover RH.


Hide 71629A 4.INSTALL REAR SEAT CUSHION HINGE COVER RH

a.
B411001

Temporarily install the No. 1 seat leg sub-assembly RH with the bolt until it contacts the body.


b.

Fold the seat in the installation direction (1) and lock the rear seat lock assembly RH.

HINT:

Make sure it is securely locked.


B405092C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)



c.

Move the seatback of the rear No. 1 seat assembly RH in the installation direction (2) and lock it.


d.
B404925N01
0.75,1.792 0.99,2.01 0.24,0.219 10 true (2) 2.844,1.094 3.083,1.344 0.24,0.25 10 true (1)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


e.
B404924

Attach the claw and guide to install the rear seat cushion hinge cover RH.


Hide 71629A 5.INSTALL REAR SEAT CUSHION HINGE COVER RH

a.
B404923

Attach the claw and guide to install the rear seat cushion hinge cover RH.