62792V
1.INSTALL UPPER QUARTER WINDOW MOULDING LH
When installing the upper quarter window moulding LH, heat the vehicle body and upper quarter window moulding LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Upper Quarter Window Moulding LH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *a | Double-sided Tape |
|
Install in this Direction |
Install a new upper quarter window moulding LH.
Using a heat light, heat the vehicle body.
Remove the peeling paper from the face of the upper quarter window moulding LH.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the clip so as to apply the double-sided tape and install a new upper quarter window moulding LH as shown in the illustration.
Press the upper quarter window moulding LH firmly to install it.
Remove the protective tape.
62791G
2.INSTALL UPPER QUARTER WINDOW MOULDING RH
Use the same procedure described for the LH side.