Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Front)
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203219 WHEEL OPENING MOULDING(for Front) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Front)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75602A 1.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

HINT:

When installing the front fender moulding sub-assembly LH, heat the vehicle body and front fender moulding sub-assembly LH using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Fender Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front fender moulding sub-assembly LH.

i.

Using a heat light, heat the vehicle body.


ii.

Remove the peeling paper from the face of the double-sided tape.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the clip to install the front fender moulding sub-assembly LH as shown in the illustration.

HINT:

Press the front fender moulding sub-assembly LH firmly to install it.


B410814C01
5.74,0.75 5.74,0.271 5.74,0.271 6.083,0.271 true 6.125,0.198 6.365,0.438 0.24,0.24 10 true *a
*a Double-sided Tape - -
V113147

Install in this Direction - -




c.

Remove the protective tape.


d.

Install the 2 screws.


e.

Install the 3 clips.


Hide 52119A 2.INSTALL FRONT BUMPER COVER