Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Rear)
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203220 WHEEL OPENING MOULDING(for Rear) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Rear)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 52159 1.REMOVE REAR BUMPER COVER

Hide 75606A 2.REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

HINT:

When removing the quarter outside moulding sub-assembly LH, heat the vehicle body and quarter outside moulding sub-assembly LH using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Quarter Outside Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B410780C01
2.688,0.74 2.604,0.708 false
V100155

Protective Tape


Put protective tape around the quarter outside moulding sub-assembly LH.


b.
B410781

Remove the retainer.


c.

Detach the clip and remove the quarter outside moulding sub-assembly LH.

B410782C01
5.344,1.104 5.344,0.635 5.344,0.635 5.635,0.635 true 5.688,0.563 5.948,0.781 0.26,0.219 10 true *a
*a Double-sided Tape - -
V100135

Order of Removal
V113146

Place Hands Here
V113147

Remove in this Direction - -