Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203221 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  REASSEMBLY  


PROCEDURE

Hide 76825K 1.INSTALL NO. 3 BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:
·

When installing the No. 3 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

·

Use the same procedure for both No. 3 back door outside garnish protectors.



Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B400263C01
0.458,1.688 0.344,1.552 0.344,1.552 0.563,1.656 true 2.865,1.667 3.104,1.563 3.104,1.563 2.958,1.698 true 0.469,1.896 0.625,2.094 0.156,0.198 10 false A 2.875,1.906 3.031,2.104 0.156,0.198 10 false B 0.177,1.458 0.49,1.656 0.313,0.198 10 false *a 3.125,1.49 3.344,1.698 0.219,0.208 10 false *a
*a Mark-off Line


Install a new No. 3 back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish.


ii.

Remove the peeling paper from the face of the No. 3 back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.


Standard:
Area Specified Condition
A 1.5 mm (0.0591 in.)
B 1.5 mm (0.0591 in.)




Hide 76825J 2.INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:
·

When installing the No. 2 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

·

Use the same procedure for both No. 2 back door outside garnish protectors.



Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B400250

Install a new No. 2 back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish.


ii.

Remove the peeling paper from the face of the No. 2 back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 2 back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.




Hide 76825H 3.INSTALL NO. 1 BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:
·

When installing the No. 1 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.



Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B400264C01
0.448,0.698 0.5,0.844 0.5,0.844 0.552,0.698 false 2.833,0.698 2.875,0.854 2.875,0.854 2.927,0.688 false 3.01,0.271 3.219,0.542 0.208,0.271 10 false B 0.271,0.26 0.479,0.531 0.208,0.271 10 false A 0.427,0.854 0.635,1.125 0.208,0.271 10 false *a 2.802,0.833 3.01,1.104 0.208,0.271 10 false *a
*a Mark-off Line


Install a new No. 1 back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish.


ii.

Remove the peeling paper from the face of the No. 1 back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 1 back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.


Standard:
Area Specified Condition
A 1.5 mm (0.0591 in.)
B 1.5 mm (0.0591 in.)




Hide 75441B 4.INSTALL BACK DOOR NAME PLATE