Home › Engine / Hybrid System › 1GD-FTV ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM3270E _51 Engine / Hybrid System _041671 1GD-FTV ENGINE CONTROL _0203622 ENGINE COOLANT TEMPERATURE SENSOR A

1GD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422C 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.
A346049N01
1.458,1.625 1.583,1.625 1.583,1.625 1.854,1.135 true 1.156,1.542 1.479,1.698 0.323,0.156 10 true SST

Using SST, install the engine coolant temperature sensor to the cylinder head sub-assembly.

SST
09817-33191  

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector.


Hide 12601B 5.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY