Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)
RM3270E _59 Vehicle Exterior _041717 DOOR / HATCH _0205100 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362C11
1.719,1.323 2.458,1.323 false 1.542,1.229 1.729,1.396 0.188,0.167 10 false *1
*1 String


Tie the string that was passed through the engine compartment to the end of the hood lock control cable assembly as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Pass the hood lock control cable assembly through the vehicle body, and then attach the grommet and each clamp.


c.

Untie the string from the hood lock control cable assembly.

B408873C04
2.219,3.156 2.219,3.375 2.219,3.375 2.094,3.375 true 2.375,1.51 2.177,1.51 2.177,1.51 2.063,1.729 true 1.917,0.833 2.021,0.927 2.021,0.927 2.271,0.927 true 2.938,0.813 3.042,0.906 3.042,0.906 3.292,0.906 true 1.896,2.198 2.052,2.198 2.052,2.198 2.052,1.99 true 2.24,0.552 2.24,0.229 2.24,0.229 1.99,0.229 true 2.229,2.865 2.5,2.865 true 3.354,0.5 3.354,0.302 3.354,0.302 3.156,0.302 true 4.438,0.573 4.438,0.375 4.438,0.375 4.24,0.375 true 4.198,0.854 4.448,0.854 true 5.49,0.927 5.74,0.927 true 5.813,0.573 5.813,0.375 5.813,0.375 5.906,0.375 true 3.802,3.323 3.802,3.542 3.802,3.542 3.677,3.542 true 3.75,2.917 3.552,2.917 3.552,2.917 3.438,3.135 true 2.417,2.771 2.635,2.99 0.219,0.219 10 true *1 2.292,1.438 2.51,1.656 0.219,0.219 10 true *1 1.844,0.146 2.063,0.365 0.219,0.219 10 true *3 2.99,0.188 3.208,0.406 0.219,0.219 10 true *3 4.063,0.74 4.281,0.958 0.219,0.219 10 true *1 4.115,0.271 4.333,0.479 0.219,0.208 10 true *2 1.917,3.271 2.115,3.49 0.198,0.219 10 true *3 1.771,2.083 1.969,2.302 0.198,0.219 10 true *3 2.177,0.833 2.375,1.052 0.198,0.219 10 true *1 3.24,0.813 3.438,1.031 0.198,0.219 10 true *1 5.688,0.813 5.906,1.031 0.219,0.219 10 true *1 5.885,0.292 6.104,0.51 0.219,0.219 10 true *3 3.542,3.469 3.74,3.688 0.198,0.219 10 true *3 3.708,2.802 3.927,3.021 0.219,0.219 10 true *1
*1 Hood Lock Control Cable Assembly *2 Grommet
*3 Clamp - -



Hide 53601 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B393838

Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.


b.
B408872

Attach the claw to install the hood lock control lever sub-assembly.


Hide 53510 3.INSTALL HOOD LOCK ASSEMBLY

a.
B405473

Apply MP grease to the sliding parts of the hood lock assembly.


b.

Attach the clamp to connect the hood lock control cable assembly to the hood lock assembly.


c.
B408871C02
0,0 0,0 false
V100135

Bolt
V100136

Connector


Install the hood lock assembly with the 3 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


d.

w/ Engine Hood Courtesy Switch:

Connect the connector.


Hide 53117C 4.INSTALL NO. 1 RADIATOR GRILLE RETAINER