Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM3270E _59 Vehicle Exterior _041717 DOOR / HATCH _0205107 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Smart Entry and Start System)

a.

Check the operation of the back door opener switch.

i.
B428591C01
2.26,1.115 2.573,0.604 2.573,0.604 2.802,0.604 true 1.344,1.115 0.969,0.594 0.969,0.594 0.792,0.594 true 1.021,4.083 1.438,3.646 true 2.51,4.094 2.115,3.656 true 1.76,4.156 1.76,3.656 true 2.573,4.146 2.885,4.344 0.313,0.198 10 false L 0.875,4.104 1.188,4.302 0.313,0.198 10 false UL 1.719,4.177 2.031,4.375 0.313,0.198 10 false E 0.594,0.51 0.906,0.708 0.313,0.198 10 false *b 2.865,0.531 3.177,0.729 0.313,0.198 10 false *c 1.635,2.5 1.948,2.698 0.313,0.198 10 false *a
*a Component without harness connected
(Back Door Opener Switch Assembly)
*b Open Switch
*c Lock Switch


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



b.

Check the operation of the back door lock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (L) - 2 (E) Back door lock switch not pushed (OFF) 10 kΩ or higher
1 (L) - 2 (E) Back door lock switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



Hide 84840G 2.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Smart Entry and Start System)

a.

Check the operation of the back door opener switch.

i.
B428592C01
1.417,1.229 1.75,0.573 1.75,0.573 2.073,0.573 true 0.979,4.073 1.396,3.656 true 2.052,4.083 1.698,3.656 true 1.573,2.427 1.885,2.625 0.313,0.198 10 false *a 2.125,0.49 2.438,0.688 0.313,0.198 10 false *b 0.844,4.094 1.156,4.292 0.313,0.198 10 false UL 2.073,4.115 2.385,4.313 0.313,0.198 10 false E
*a Component without harness connected
(Back Door Opener Switch Assembly)
*b Open Switch


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.