Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
67939B
1.REMOVE CENTER BACK DOOR GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
74811D
4.REMOVE DOOR PULL HANDLE
67750
5.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
84280D
6.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
Disconnect the connector.
Remove the 4 screws.
Detach the clip and remove the power back door sensor assembly LH.