Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM3270E _59 Vehicle Exterior _041717 DOOR / HATCH _0205115 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68946 1.INSTALL UPPER BACK DOOR DAMPER STAY BRACKET LH

a.

Clean the threaded portion on the vehicle body with non-residue solvent.


b.
B408710N01
1.854,1.375 2.01,1.573 0.156,0.198 10 true 1 2.01,0.604 2.167,0.802 0.156,0.198 10 true 2

Temporarily install the upper back door damper stay bracket LH.


c.

Tighten 2 new bolts to install the upper back door damper stay bracket LH.

HINT:

Tighten the 2 bolts in the order shown in the illustration.


Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 68948 2.INSTALL LOWER BACK DOOR DAMPER STAY BRACKET LH

a.

Clean the threaded portion on the vehicle body with non-residue solvent.


b.
B408890N01
1.115,0.771 1.271,0.969 0.156,0.198 10 true 1 2.083,0.729 2.24,0.927 0.156,0.198 10 true 2

Temporarily install the lower back door damper stay bracket LH.


c.

Tighten 2 new bolts to install the lower back door damper stay bracket LH.

HINT:

Tighten the 2 bolts in the order shown in the illustration.


Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 68960 3.INSTALL BACK DOOR STAY ASSEMBLY LH

a.

When reusing the back door stay assembly LH:

i.
B408718

Install the back door stay assembly LH with the 2 stop rings.



b.
B408717

Install the back door stay assembly LH.

NOTICE:
·

Install the back door stay assembly while supporting the back door by hand.

·

Check that the back door stay assembly is engaged in the ball joint and that the back door support assembly cannot be pulled out.