Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER
RM3270E _54 Brake _041692 BRAKE SYSTEM (OTHER) _0205356 BRAKE MASTER CYLINDER A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER  REASSEMBLY  


PROCEDURE

Hide 47299 1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

a.

Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.


Hide 47230 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.


Hide 47287 3.INSTALL BRAKE FLUID INFORMATION LABEL

Hide 47255 4.INSTALL MASTER CYLINDER RESERVOIR GROMMET

a.
C323715C01
0,0 0,0 false
V100144

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.


b.

Install the 2 master cylinder reservoir grommets to the brake master cylinder body.


Hide 47220D 5.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Secure the brake master cylinder body in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder body.



b.

Install the brake master cylinder reservoir assembly to the brake master cylinder body.


c.

Using a pin punch and hammer, install a pin to the brake master cylinder reservoir assembly.


d.

Remove the brake master cylinder sub-assembly from the vise.