Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER › 2015.08–2016.01
RM3270E _54 Brake _041692 BRAKE SYSTEM (OTHER) _0205357 BRAKE BOOSTER A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to release the vacuum from the brake booster before removing the brake master cylinder sub-assembly from the brake booster assembly.


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47101A 2.REMOVE BRAKE PEDAL RETURN SPRING

Hide 47264A 3.REMOVE PUSH ROD PIN

Hide 47264D 4.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Loosen the push rod clevis lock nut.


b.

Remove the brake master cylinder push rod clevis.


Hide 5.DISCONNECT VACUUM HOSE

a.

Slide the clip and disconnect the vacuum hose from the brake vacuum check valve assembly.


Hide 47201 6.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 44610 7.REMOVE BRAKE BOOSTER ASSEMBLY

a.

Remove the brake vacuum check valve assembly from the brake booster assembly.


b.

Remove the vacuum warning switch assembly from the brake booster assembly.

Click hereBrake>BRAKE SYSTEM (OTHER)>VACUUM WARNING SWITCH(for Diesel)>REMOVAL


c.

Remove the 2 grommets from the brake booster assembly.


d.
C323707

Remove the 4 nuts.


e.

Pull out the brake booster assembly with the brake booster gasket.

NOTICE:

Do not damage the brake lines.



Hide 44785 8.REMOVE BRAKE BOOSTER GASKET