44785
1.INSTALL BRAKE BOOSTER GASKET
Install a new brake booster gasket to the brake booster assembly.
44610
2.INSTALL BRAKE BOOSTER ASSEMBLY
Install the brake booster assembly with the 4 nuts.
Install the 2 new grommets to the brake booster assembly.
Install the vacuum warning switch assembly to the brake booster assembly.
Click hereBrake>BRAKE SYSTEM (OTHER)>VACUUM WARNING SWITCH(for Diesel)>INSTALLATION
Install the brake vacuum check valve assembly to the brake booster assembly.
47201
3.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY
4.CONNECT VACUUM HOSE
Connect the vacuum hose to the brake vacuum check valve assembly, and slide the clip to secure it.
47264D
5.INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
Install the brake master cylinder push rod clevis to the brake booster assembly.
47264A
6.INSTALL PUSH ROD PIN
47101A
7.INSTALL BRAKE PEDAL RETURN SPRING
8.BLEED BRAKE SYSTEM
9.BLEED CLUTCH LINE (for Manual Transmission)
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
10.CHECK AND ADJUST BRAKE PEDAL HEIGHT