Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for 1GD-FTV, 2GD-FTV)
RM3270E _54 Brake _041692 BRAKE SYSTEM (OTHER) _0205358 VACUUM PUMP G

BRAKE SYSTEM (OTHER)  VACUUM PUMP  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. OPERATION CHECK

a.

Disconnect the vacuum hose from the vacuum pump assembly.


b.
C323727C01
0.51,1.458 0.51,1.094 0.51,1.094 0.677,1.094 true 0.698,1 0.917,1.177 0.219,0.177 10 true *a
*a Vacuum Gauge


Connect the hose of the vacuum gauge to the vacuum pump assembly.


c.

Start the engine and warm it up for more than 2 minutes.


d.

With the engine idling, check the negative pressure of the vacuum pump assembly.

Standard pressure:

More than 87 kPa (650 mmHg, 25.6 in.Hg)


HINT:

The vacuum pump assembly is listed as one of the 200000 km (124000 mile) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 miles) and replace parts as necessary.



e.

Remove the vacuum gauge from the vacuum pump assembly.


f.

Connect the vacuum hose to the vacuum pump assembly.