Home › Brake › BRAKE (REAR) › REAR DISC BRAKE PAD(for Rear Disc Brake) › 2015.08–2016.01
RM3270E _54 Brake _041694 BRAKE (REAR) _0205364 REAR DISC BRAKE PAD(for Rear Disc Brake) A

BRAKE (REAR)  REAR DISC BRAKE PAD(for Rear Disc Brake)  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



NOTICE:

After replacing the disc brake pads, the clearance between the disc brake pads and rear discs becomes larger and the brake pedal feel becomes softer. Therefore, after replacing the disc brake pads, depress the brake pedal several times and check the clearance and brake pedal feel.


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47787A 3.REMOVE DUST BOOT PROTECTOR LH

a.
C326955

Remove the 2 bolts and dust boot protector LH from the rear disc brake cylinder assembly LH.


Hide 47850 4.REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C326921

Remove the 2 cylinder slide pins from the rear disc brake cylinder assembly LH.


b.

Remove the rear disc brake cylinder assembly LH from the rear disc brake cylinder mounting LH.


Hide 04466 5.REMOVE REAR DISC BRAKE PAD

a.

Remove the 2 rear disc brake pads together with the rear disc brake anti-squeal shims from the rear disc brake cylinder mounting LH.


Hide 04946 6.REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM

a.

Remove the 2 rear disc brake anti-squeal shims from the rear disc brake pads.


Hide 7.REMOVE REAR DISC BRAKE PAD WEAR INDICATOR PLATE

a.

Remove the rear disc brake pad wear indicator plate from the inner disc brake pad.


Hide 8.INSTALL REAR DISC BRAKE PAD WEAR INDICATOR PLATE

a.

Install the rear disc brake pad wear indicator plate to the inner side disc brake pad.

HINT:

Install the rear disc brake pad wear indicator facing downward.



Hide 04946 9.INSTALL REAR DISC BRAKE ANTI-SQUEAL SHIM

a.

Install the 2 rear disc brake anti-squeal shims on each rear disc brake pad.

NOTICE:

There should be no oil or grease on the friction surfaces of the brake pads and the rear disc.



Hide 04466 10.INSTALL REAR DISC BRAKE PAD

a.
C326956C01
2.604,1.563 2.729,1.844 2.729,1.844 2.896,1.844 false 2.938,1.771 3.292,1.948 0.354,0.177 10 true SST
V113147

Expand


Using SST, push back the rear disc brake piston.

NOTICE:

Do not forcibly install the piston into the rear disc brake cylinder.


SST
09719-77010  


b.

Install the 2 rear disc brake pads together with the rear disc brake anti-squeal shims to the rear disc brake cylinder mounting LH.


Hide 47850 11.INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C326937C01
0,0 0,0 false
V100155

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to the sliding surfaces of the 2 rear disc brake cylinder slide pins.


b.

Install the rear disc brake cylinder with the 2 rear disc brake cylinder slide pins.

Torque:
88.3 N*m (900 kgf*cm, 65 ft.*lbf)


c.

Depress the brake pedal several times.


Hide 47787A 12.INSTALL DUST BOOT PROTECTOR LH

a.

Install the dust boot protector LH with the 2 bolts.

Torque:
7.9 N*m (81 kgf*cm, 70 in.*lbf)


Hide 14.INSTALL REAR WHEEL