Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/ Smart Entry and Start System)
RM3270E _58 Vehicle Interior _041705 DOOR LOCK _0205677 TRANSMITTER BATTERY(w/ Smart Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/ Smart Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
B405459C02
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Push the release hook knob and extract the mechanical key.


b.
B405460C02
0,0 0,0 false
V100155

Protective Tape
V113147

Remove in this Direction


Using a screwdriver, remove the transmitter housing cover as shown in the illustration.

HINT:

Tape the screwdriver tip before use.



Hide 89745C 2.REMOVE TRANSMITTER BATTERY

a.
B405461C02
0,0 0,0 false
V100155

Protective Tape
V113147

Remove in this Direction


Using a screwdriver, remove the transmitter battery.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.



HINT:

Tape the screwdriver tip before use.



Hide 89745C 3.INSTALL TRANSMITTER BATTERY

a.
B405462C01
0,0 0,0 false
V113147

Install in this Direction


Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89751A 4.INSTALL TRANSMITTER HOUSING COVER

a.
B405463C01
0,0 0,0 false
V113147

Install in this Direction


Install the transmitter housing cover as shown in the illustration.


b.
B405464C01
0,0 0,0 false
V113147

Install in this Direction


Insert the mechanical key as shown in the illustration.


c.

Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when switch is pressed.