These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC No. | Detection Item | Trouble Area |
|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | ·
CAN communication system ·
ECM ·
Multiplex network door ECU |
| U0122 | Lost Communication with Vehicle Dynamics Control Module | ·
CAN communication system ·
Brake actuator assembly (skid control ECU) ·
Multiplex network door ECU |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | ·
CAN communication system ·
Combination meter assembly ·
Multiplex network door ECU |
| U0327 | Software Incompatibility with Vehicle Security Control Module | ·
CAN communication system ·
Certification ECU (smart key ECU assembly) ·
Multiplex network door ECU |
| U1117 | Lost Communication with Accessory Gateway | ·
CAN communication system ·
Bus buffer ECU ·
Multiplex network door ECU |
Clear the DTCs.
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DTC CHECK / CLEAR
DTC (CAN communication system DTC) is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG