Perform these procedures after the engine has cooled down.
3.INSPECT COOLING AND HEATER SYSTEM
Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.
6.INSPECT EXHAUST PIPES AND MOUNTINGS
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
9.INSPECT AIR CLEANER FILTER
Remove the air cleaner filter.
Do not start the engine with the air cleaner filter removed, as this may damage the engine.
Visually check that the air cleaner filter is not excessively damaged or oily. If necessary, replace the air cleaner filter with a new one.
If cleaning an air cleaner filter element, blow compressed air to clean it.
When using an air cleaner filter that uses compressed air, wear safety glasses and a dust mask in order to protect your health.
When an excessive amount of dirt is present, replace the air cleaner filter element.
Reinstall the air cleaner filter.
11.INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.