Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041707 LIGHTING (INT) _0210091 LIGHTING SYSTEM U

LIGHTING (INT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND BODY ECU


E317657C01
0.594,3.865 0.927,4.104 0.333,0.24 1.99,3.865 2.323,4.104 0.333,0.24 3.458,3.865 3.792,4.104 0.333,0.24 4.844,3.865 5.177,4.104 0.333,0.24 6.198,3.865 6.531,4.104 0.333,0.24 0.594,5.063 0.927,5.302 0.333,0.24 1.969,5.063 2.302,5.302 0.333,0.24 3.333,5.063 3.667,5.302 0.333,0.24 4.729,5.063 5.063,5.302 0.333,0.24 6.198,5.063 6.531,5.302 0.333,0.24 0.604,6.448 0.938,6.688 0.333,0.24 1.938,6.448 2.271,6.688 0.333,0.24 3.375,6.448 3.708,6.688 0.333,0.24 4.833,6.448 5.167,6.688 0.333,0.24 6.208,6.438 6.542,6.677 0.333,0.24 3.344,7.708 3.677,7.948 0.333,0.24 0.104,0.052 0.417,0.292 0.313,0.24 12 false *1 0.75,0.938 1.063,1.135 0.313,0.198 10 false 2L 0.729,1.281 1.042,1.479 0.313,0.198 10 false 2M 0.74,1.667 1.052,1.865 0.313,0.198 10 false 2D 0.74,2.031 1.052,2.229 0.313,0.198 10 false 2K 0.729,2.375 1.042,2.573 0.313,0.198 10 false 2C 0.74,3.115 1.052,3.313 0.313,0.198 10 false 2A 1.281,3.104 1.594,3.302 0.313,0.198 10 false 2B 3.333,0.896 3.49,1.094 0.156,0.198 10 false A 6.375,0.583 6.688,0.781 0.313,0.198 10 false 2Q 6.396,0.927 6.708,1.125 0.313,0.198 10 false 2J 6.385,1.281 6.698,1.479 0.313,0.198 10 false 2P 6.385,1.656 6.698,1.854 0.313,0.198 10 false 2N 6.385,2 6.698,2.198 0.313,0.198 10 false 2G 6.396,2.375 6.708,2.573 0.313,0.198 10 false 2H 5.865,2.927 6.177,3.125 0.313,0.198 10 false 2F 6.375,2.99 6.688,3.188 0.313,0.198 10 false 2E 0.698,3.906 1.01,4.104 0.313,0.198 10 false 2L 2.063,3.906 2.375,4.104 0.313,0.198 10 false 2M 3.552,3.896 3.865,4.094 0.313,0.198 10 false 2D 4.917,3.906 5.229,4.104 0.313,0.198 10 false 2K 6.271,3.906 6.594,4.125 0.323,0.219 10 false 2C 0.667,5.094 0.979,5.292 0.313,0.198 10 false 2A 2.042,5.094 2.354,5.292 0.313,0.198 10 false 2B 3.406,5.104 3.719,5.302 0.313,0.198 10 false 2Q 4.823,5.094 5.135,5.292 0.313,0.198 10 false 2J 6.292,5.104 6.604,5.302 0.313,0.198 10 false 2P 0.688,6.479 1,6.677 0.313,0.198 10 false 2N 2.021,6.479 2.333,6.677 0.313,0.198 10 false 2G 3.458,6.479 3.771,6.677 0.313,0.198 10 false 2H 4.927,6.479 5.24,6.677 0.313,0.198 10 false 2F 6.292,6.469 6.604,6.667 0.313,0.198 10 false 2E 3.469,7.74 3.625,7.938 0.156,0.198 10 false A
*1 Instrument Panel Junction Block Assembly - -


E317658C01
2.24,3.344 2.625,3.583 0.385,0.24 4.563,3.344 4.948,3.583 0.385,0.24 0.125,0.073 0.438,0.365 0.313,0.292 12 false *1 5.76,1.531 6.219,1.729 0.458,0.198 10 false G34 5.76,2.021 6.219,2.219 0.458,0.198 10 false G33 2.292,3.375 2.75,3.573 0.458,0.198 10 false G34 4.635,3.375 5.094,3.573 0.458,0.198 10 false G33
*1 Body ECU - -


a.

Remove the body ECU from the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for RHD)>REMOVAL


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

A-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
A-7 (IG) - Body ground - IG power supply Ignition switch ON 11 to 14 V*1
10.5 to 16 V*2
A-1 (GND) - Body ground - Ground Always Below 1 Ω


c.

Install the body ECU to the instrument panel junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for RHD)>INSTALLATION


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2Q-9 (ILE) - Body ground B - Body ground Illumination signal Map light, spot light and No. 1 room light switch in DOOR position and map light assembly, sot light assembly and No. 1 room light assembly come on Below 1 V
Map light, spot light and No. 1 room light switch in DOOR position and map light assembly, spot light and No. 1 room light assembly go off 11 to 14 V
2L-4 (DCTY) - Body ground R - Body ground Front door courtesy light switch assembly RH signal Front door RH open Below 1 V
Front door RH closed Pulse generation
G33-14 (PCTY) - Body ground LG - Body ground Front door courtesy light switch assembly LH signal Front door LH open Below 1 V
Front door LH closed Pulse generation
G33-15 (LSWD) - Body ground R - Body ground Front door RH unlock detection switch signal Front door RH locked Pulse generation
Front door RH unlocked Below 1 V
G33-8 (KSW) - Bodyground*1 G - Body ground Unlock warningswitch assemblysignal No key in ignitionkey cylinder Pulse generation
Key in ignition keycylinder Below 1 V
G33-9 (PRG) - Body ground*2 V - Body ground Signal output to certification ECU (smart key ECU assembly) Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
2Q-2 (ACTY) - Body ground Y - Body ground Door courtesy switch signal All doors closed except driver door Pulse generation
Any door opened except driver door Below 1 V
2P-13 (DOMR) - Body ground L - Body ground Battery saving control (interior light auto cut function) signal Battery saving control (interior light auto cut function) operating 11 to 14 V
Battery saving control (interior light auto cut function) not operating Below 1.7 V
G33-16 (RDA) - Body ground*2 W - Body ground Signal input from certification ECU (smart key ECU assembly) Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
G33-2 (LSWP) - Body ground Y - Body ground Door unlock detection switch input (except front door RH) Except front door RH unlocked Below 1 V
Except front door RH locked Pulse generation

*1: w/o Smart Entry and Start System

*2: w/ Smart Entry and Start System



CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Smart Entry and Start System)


a.

Disconnect the G16 certification ECU (smart key ECU assembly) connector.

B391999E06
2.281,0.583 2.781,0.833 0.5,0.25 4.052,0.583 4.552,0.833 0.5,0.25 2.396,0.635 2.854,0.833 0.458,0.198 10 false G16 4.167,0.635 4.625,0.833 0.458,0.198 10 false G17


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G16-1 (+B) - Body ground P - Body ground Battery power supply Always 11 to 14 V
G16-10 (E) - Body ground BR - Body ground Ground Always Below 1 Ω


c.

Reconnect the G16 certification ECU (smart key ECU assembly) connector.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G16-19 (SWIL) - G16-24 (AGND) G - SB Engine switch illumination drive output Engine switch illumination on 9 to 14 V
Engine switch illumination off Below 1 V
G16-9 (LSWP) - G16-10 (E) L - BR Door unlock detection switch input (except front door RH) Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch not pressed Below 1 V
Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch pressed 8.5 V or higher
G17-13 (RDA3) - G16-10 (E) W - BR Signal output to body ECU Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
G17-36 (PRG3) - G16-10 (E) V - BR Signal input from body ECU Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
G16-21 (ACCD) - G16-10 (E) B - BR ACC signal Engine switch off → Engine switch ACC 1 V or less → 8.5 V or higher
G16-20 (IG1D) - G16-10 (E) L - BR IG1 signal Engine switch ACC → Engine switch on (IG) 1 V or less → 9 V or higher