Home › Engine / Hybrid System › 1GD-FTV COOLING › THERMOSTAT
RM3270E _51 Engine / Hybrid System _041676 1GD-FTV COOLING _0210915 THERMOSTAT G

1GD-FTV COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:
G035894

The valve opening temperature is inscribed on the thermostat.


a.

Immerse the thermostat in water and then gradually heat the water.

CAUTION:
A342307

·

Do not your hands into the water that has been heated for the inspection.

·

Touching the heated water could result in burns.




b.

Check the valve opening temperature.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not within the specified range, replace the thermostat.


c.
A224964

Check the valve lift.

Standard valve lift:

10 mm (0.394 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is below 77°C (171°F).

If the valve is not fully closed, replace the thermostat.