Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3270E _59 Vehicle Exterior _041719 WIPER / WASHER _0213515 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

E239384C16
1.281,1.24 1,1.698 true 1.521,1.24 1.406,1.698 true 0.104,0.063 0.365,0.26 0.26,0.198 10 false *a 1.302,1.729 1.542,1.906 0.24,0.177 10 false +B 0.896,1.729 0.979,1.906 0.083,0.177 10 false E
*a Component without harness connected (Rear Wiper Motor Assembly)


a.

Check that the rear wiper motor assembly operates.

NOTICE:

Check that the body ground is connected.


i.

Apply battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (+B)
Battery negative (-) → Terminal 5 (E)
Motor operates


If the result is not as specified, replace the rear wiper motor assembly.



b.
E239384C17
1.281,1.24 1,1.698 true 1.948,1.24 2.229,1.698 true 0.104,0.063 0.365,0.26 0.26,0.198 10 false *a 2.219,1.729 2.531,1.917 0.313,0.188 10 false C1 0.896,1.729 0.979,1.906 0.083,0.177 10 false E
*a Component without harness connected (Rear Wiper Motor Assembly)


Check the wiper intermittent operation.

NOTICE:

Check that the body ground is connected.


i.

Apply battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (C1)
Battery negative (-) → Terminal 5 (E)
Motor operates


If the result is not as specified, replace the rear wiper motor assembly.