85035
1.REMOVE WASHER NOZZLE SUB-ASSEMBLY
Use the same procedure for both washer nozzle sub-assemblies.
|
Protective Tape |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a screwdriver, detach the claw in the order shown in the illustration.
Do not damage the windshield glass.
Tape the screwdriver tip before use.
Disconnect the washer nozzle sub-assembly from the washer hose and remove the washer nozzle sub-assembly.
Washer nozzle sub-assembly cannot be reused.