81360T
1.REMOVE SPOT LIGHT ASSEMBLY (ROOM LIGHT)
for Manual Air Conditioning System:
| *a | Protective Tape |
|
Insert Thin-bladed Screwdriver Here |
|
Remove in this Direction |
Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the spot light lens.
Tape the thin-bladed screwdriver tip before use.
|
Place Fingers Here |
|
Remove in this Direction |
Place your fingers at the position shown in the illustration and detach the clip and guide.
| *a | Protective Tape |
Using a screwdriver, detach the claw and remove the spot light assembly (room light) from the spot light switch base.
Tape the screwdriver tip before use.
for Automatic Air Conditioning System:
| *a | Protective Tape |
|
Insert Thin-bladed Screwdriver Here |
|
Remove in this Direction |
Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the spot light lens.
Tape the thin-bladed screwdriver tip before use.
|
Place Fingers Here |
|
Remove in this Direction |
Place your fingers at the position shown in the illustration and detach the clip and guide.
| *a | Protective Tape |
Using a screwdriver, detach the claw and remove the spot light assembly (room light) from the spot light switch base.
Tape the screwdriver tip before use.