Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR › 2015.08–2016.01
RM3270E _54 Brake _041691 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0217080 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  INSTALLATION  


PROCEDURE

Hide 89543 1.INSTALL FRONT SPEED SENSOR LH

a.
C322645

Install the skid control sensor clamp to the steering knuckle with the bolt.

Torque:
13.5 N*m (138 kgf*cm, 10 ft.*lbf)


b.

Install the front speed sensor LH to the steering knuckle with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.

·

While inserting the speed sensor into the steering knuckle hole, do not strike or damage the sensor tip.

·

After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

·

When installing the sensor, do not twist the wire harness.




c.
C322643

Install the harness clamp with the bolt.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




d.

Attach the clamp.


e.
C322638

Attach the clamp.


f.

Install the 2 harness clamps with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:
·

When installing the clamps, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




g.
C322637

Attach the 2 clamps.

NOTICE:

When attaching the clamps, do not twist the wire harness.



h.
C322635

Attach the 2 clamps.

NOTICE:

When attaching the clamps, do not twist the wire harness.



i.

Connect the connector and attach the clamp.

NOTICE:
·

Do not attach the connector to the radiator fan shroud before connecting the connector.

·

Securely connect the connector.




Hide 89542 2.INSTALL FRONT SPEED SENSOR RH

a.
C322644

Install the skid control sensor clamp to the steering knuckle with the bolt.

Torque:
13.5 N*m (138 kgf*cm, 10 ft.*lbf)


b.

Install the front speed sensor RH to the steering knuckle with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.

·

While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip.

·

After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

·

When installing the sensor, do not twist the wire harness.




c.

Attach the clamp.


d.
C322642

Install the harness clamp with the bolt.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




e.

Attach the clamp.


f.
C322640

Install the 2 harness clamps with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:
·

When installing the clamps, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




g.

Attach the clamp.


h.
C322639

Attach the 2 clamps.

NOTICE:

When attaching the clamps, do not twist the wire harness.



i.
C322636

Attach the 2 clamps.

NOTICE:

When attaching the clamps, do not twist the wire harness.



j.

Connect the connector and attach the clamp.

NOTICE:
·

Do not attach the connector to the radiator fan shroud before connecting the connector.

·

Securely connect the connector.




k.
C322641

for 1GD-FTV, 2GD-FTV:

i.

Install the upper arm heat insulator to the front suspension tower with the 2 bolts.

Torque:
25.5 N*m (260 kgf*cm, 19 ft.*lbf)



Hide 3.INSTALL FRONT WHEEL