Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for TMT Made) › 2015.08–2016.01
RM3270E _52 Drivetrain _041685 DRIVE SHAFT / PROPELLER SHAFT _0217831 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 51569 1.REMOVE PROPELLER SHAFT GUARD

a.
C317869

for transfer side:

Remove the 2 bolts and propeller shaft guard.


b.
C317870

for center support bearing side:

Remove the 2 bolts and propeller shaft guard.


Hide 37100 2.REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

a.
C317863C01
1.615,1.469 2.146,1.979 2.146,1.979 1.646,1.365 true 2.208,1.906 2.521,2.104 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


b.

Remove the 4 nuts and 4 washers and disconnect the propeller shaft.


c.
C317864C01
1.573,1.469 2.188,1.854 2.188,1.854 1.573,1.385 true 2.281,1.792 2.594,1.99 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


d.

Remove the 4 nuts and 4 washers.


e.
C317877

Remove the 2 set bolts of the center No. 1 support bearing assembly from the frame crossmember.


f.

Remove the propeller shaft with center bearing assembly.