Be sure to perform this procedure with several people as the transfer assembly is very heavy.
36179
1.INSTALL TRANSFER CASE LOWER PROTECTOR
Install the transfer case lower protector with the 4 bolts.
36100
2.INSTALL TRANSFER ASSEMBLY
| *1 | Clamp |
for AC60F:
Install the transfer assembly and 2 clamps with the 8 bolts.
Do not damage the lip of the transfer adaptor oil seal.
| *1 | Clamp |
for RC61F:
Install the transfer assembly and clamp with the 8 bolts.
Do not damage the lip of the transfer adaptor oil seal.
36407
3.CONNECT TRANSFER BREATHER HOSE SUB-ASSEMBLY
Connect the 2 transfer breather hose sub-assemblies and attach the 2 clamps.
4.CONNECT WIRE HARNESS
| *A | for AC60F |
| *B | for RC61F |
for AC60F:
Connect the connector and attach the 3 clamps.
for RC61F:
Connect the connector and attach the 2 clamps.
82284
5.CONNECT GROUND WIRE
12371A
6.INSTALL REAR ENGINE MOUNTING INSULATOR
51204
7.INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY
37100
8.INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
37140
9.INSTALL FRONT PROPELLER SHAFT ASSEMBLY
10.ADD TRANSFER OIL
11.CHECK FOR TRANSFER OIL LEAK