Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › CYLINDER HEAD › from 2016.01
RM3270E _51 Engine / Hybrid System _048650 5L-E ENGINE MECHANICAL _0231147 CYLINDER HEAD A

5L-E ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the intake valve seat while checking the intake valve seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A303237C06
2.396,0.656 2.635,0.833 0.24,0.177 10 false 45° 2.927,0.573 3.167,0.75 0.24,0.177 10 false 30° 2.823,1.698 3.063,1.875 0.24,0.177 10 false *a
*a Width


If the seating is too high on the intake valve face, use 30° and 45° cutters to correct the intake valve seat.


b.
A303238C06
2.156,0.271 2.458,0.458 0.302,0.188 10 false 60° 2.896,0.385 3.198,0.573 0.302,0.188 10 false 45° 2.854,1.646 3.156,1.833 0.302,0.188 10 false *a
*a Width


If the seating is too low on the intake valve face, use 60° and 45° cutters to correct the intake valve seat.


c.

Check that the intake valve seat contact is in the middle of the intake valve face and has the following width.

Standard width:

1.5 to 1.9 mm (0.0591 to 0.0748 in.)



Hide 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A303237C06
2.396,0.656 2.635,0.833 0.24,0.177 10 false 45° 2.927,0.573 3.167,0.75 0.24,0.177 10 false 30° 2.823,1.698 3.063,1.875 0.24,0.177 10 false *a
*a Width


If the seating is too high on the valve face, use 30° and 45° cutters to correct the exhaust valve seat.


b.
A303238C06
2.156,0.271 2.458,0.458 0.302,0.188 10 false 60° 2.896,0.385 3.198,0.573 0.302,0.188 10 false 45° 2.854,1.646 3.156,1.833 0.302,0.188 10 false *a
*a Width


If the seating is too low on the exhaust valve face, use 60° and 45° cutters to correct the exhaust valve seat.


c.

Check that the seat contact is in the middle of the exhaust valve face and has the following width.

Standard width:

1.8 to 2.2 mm (0.0709 to 0.0866 in.)