Home › Drivetrain › R151F MANUAL TRANSMISSION / TRANSAXLE › COUNTER GEAR › from 2016.01
RM3270E _52 Drivetrain _048709 R151F MANUAL TRANSMISSION / TRANSAXLE _0231341 COUNTER GEAR A

R151F MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR  REASSEMBLY  


PROCEDURE

Hide 33411A 1.INSTALL COUNTER GEAR FRONT BEARING

a.
C315243N01
0.917,0.521 1.365,0.521 false 0.563,0.448 1.021,0.646 0.458,0.198 10 false SST

Using SST and a press, press in a new counter gear front bearing to the counter gear.

SST
09515-10010  

NOTICE:

Install the counter gear front bearing so that the No. 2 counter gear front bearing snap ring groove of the bearing faces forward.



Hide 33411Q 2.INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING

a.

Select a No. 2 counter gear front bearing snap ring so that the clearance between the counter gear and No. 2 counter gear front bearing snap ring is within the specification.

Standard clearance:

0.10 mm (0.00393 in.) or less


Snap Ring Thickness:
Thickness
2.05 to 2.10 mm (0.0808 to 0.0826 in.)
2.10 to 2.15 mm (0.0827 to 0.0846 in.)
2.15 to 2.20 mm (0.0847 to 0.0866 in.)
2.20 to 2.25 mm (0.0867 to 0.0885 in.)
2.25 to 2.30 mm (0.0886 to 0.0905 in.)
2.30 to 2.35 mm (0.0906 to 0.0925 in.)



b.
C315244

Using a snap ring expander, install the No. 2 counter gear front bearing snap ring.