Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE › from 2016.01
RM3270E _51 Engine / Hybrid System _048729 1GR-FE ENGINE CONTROL _0231379 CAMSHAFT OIL CONTROL VALVE G

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15330B 1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine and turn the GTS on.


c.

Warm up the engine.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 1) or Control the VVT System (Bank 2).

Powertrain > Engine > Active Test
Tester Display
Control the VVT System (Bank1)
50004 234 112
Powertrain > Engine > Active Test
Tester Display
Control the VVT System (Bank2)
50004 234 113

e.

Check the engine speed while operating the oil control valve (OCV) using the GTS.

OK:
Tester Operation Specified Condition
VVT system is OFF (OCV is OFF) Normal engine speed
VVT system is ON (OCV is ON) Rough idle or engine stalled


If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and camshaft timing gear assembly.