Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048729 1GR-FE ENGINE CONTROL _0231384 CAMSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301M 1.INSTALL VVT SENSOR (for Bank 2)

a.

Apply a light coat of engine oil to the O-ring of the VVT sensor.

NOTICE:
·

When reusing the VVT sensor, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the VVT sensor.




b.

Install the VVT sensor with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect the VVT sensor connector.


Hide 11301M 2.INSTALL VVT SENSOR (for Bank 1)

a.

Apply a light coat of engine oil to the O-ring of the VVT sensor.

NOTICE:
·

When reusing the VVT sensor, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the VVT sensor.




b.

Install the VVT sensor with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect the VVT sensor connector.


Hide 22030 3.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY