Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048729 1GR-FE ENGINE CONTROL _0231385 CRANKSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11401G 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

NOTICE:
·

When reusing the crankshaft position sensor, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the crankshaft position sensor.




b.

Install the crankshaft position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the crankshaft position sensor connector.


Hide 88320 2.CONNECT COOLER COMPRESSOR ASSEMBLY

a.

Connect the cooler compressor assembly with the 3 bolts.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


b.

Attach the clamp.


c.

Connect the connector.


d.

Install the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)